3D Printed Spare Parts in Tbilisi
A mount snapped, a handle cracked, a plug went missing — and the manufacturer doesn’t sell that piece separately, or shipping takes a month. Sound familiar? This is exactly what 3D printing is for: the part can be printed in 24–48 hours, and it often comes out stronger than the factory one.
We print spare parts in PETG and ABS — engineering plastics that handle load, heat and outdoors. For seals and cushioning parts there is flexible TPU.
What can be printed
- Mounts and brackets: shelf holders, latches, hinges, mounting strips.
- Gears and mechanics: appliance gears, bushings, rollers, control knobs.
- Automotive plastic: trim clips, plugs, bumper and interior mounts.
- Handles and pads: doors, furniture, tools, kitchen appliances.
With a model — and without one
If you already have an STL file (found on MakerWorld, Printables or Thingiverse), just upload it to the calculator — the price is instant, and printing usually takes 24 hours.
No model? Send a photo of the broken part with its dimensions via Telegram. For simple geometry we’ll help you find a ready model in open libraries; for complex parts we’ll advise how to order modeling from a sample. And we’ll tell you honestly if the part is cheaper to buy than to model.
Which material we’ll pick
PETG by default: strong, slightly springy, unafraid of water and sun. For parts that get hot (cars, appliances) — ABS: stable up to 90°C and impact-resistant. For gaskets and dampers — flexible TPU. Not sure? Message us and we’ll match the material to the job.
How much a printed part costs
From 35 ₾. Total = weight × price per gram (PETG 0.12 ₾/g, ABS 0.14 ₾/g) + printer time at 12 ₾/hour. A typical household spare weighs 20–80 g and costs 35–60 ₾.
How the order goes
Send a file or a photo with dimensions — we confirm the price and timing within an hour. Printing usually takes 24–48 hours; before shipping we send a photo of the finished part. Delivery in Tbilisi in 1 day, across Georgia in 2–3 days, pickup is free. For a critical part we suggest ordering two at once: the second one in the same order costs almost the price of the material — the weight discounts work in your favor.
The warranty is simple: if the part failed because of our printing error, we reprint for free. If the source model’s geometry didn’t fit, we help correct the dimensions and print a new version without charging setup again.
Ready to price your part?
Upload an STL file to the calculator — your quote is ready in a minute, no calls.